ECONOMIC ELD-G-DIN LAMP 230V GREEN
Available in stock: 33 - the delivery time is 1 to 2 days.
These are devices used in control and indication systems adjusted for mounting in command
boards and panels directly on DIN-rail. They are manufactured to commutate controlling circuits
and to control the switching on or off executive mechanisms such as relays, contactors, etc. The
signal lamps and indicators find broad application in all industrial fields. The devices endure short
time current overload up to 20A, and normally they can commutate current up to 10A with their
contact system. The connection to the contact terminals is through screw terminals to which
operational conductors with section up to 2.5mm² can be joined. There are also designed buttons
combined with lamps.
TECHNICAL DATA
• Insulation voltage: 660V; 50/60Hz
• Impulse voltage wear resistance: 6000V;
• Rated current: up to 10A (230V AC)
• Short circuit protection: safety device 10A gG outside in the circuit
• Rated consumed current (for indicators and buttons combined with indicators): <20mA
• Wear resistance (indicators): >2000h
• Mechanical wear resistance (buttons): 1x106 commutation cycles
• Power of mechanical compression:
¾ At closing: 20N
¾ At opening: 8N
• Operating temperature: -20 - +65°C • Humidity: 35 – 85%RH
• Tightening moment of the joining conductors: 0.15Nm
• Section of the conductor: 1x0.5; 1x0.75; 1x1; 1x1.5; 1x2.5mm²
• Plastic: UV rays wear resistance conductors: 0.15Nm • Section of the conductor: 1x0.5; 1x0.75; 1x1; 1x1.5; 1x2.5mm²
MOUNTING
• To a DIN-rail
• Altitude: up to 2000m